High cost performance Submersible Motor 8'' Water Cool (MS200)
[CHARACTERS]
Meet the requirements of Standard IEC34-1 with the structure of water-cooled sealed lubrication, non-polluting.
The dimension of installation flange and spline meet the requirements of NEMA standard (USA National Electrical Manufacturing Association).
The outer shells of the motor and the shafts are made of stainless steel as well as the fixings. Other parts are rustproof.
The main bearing and the thrust bearing have the character of anti wearing and undertaking higher thrust load.
With anti-sand installation and reformed butyl-rubber pressure equilibrium membrane.
[PROPERTIES]
Power: Three phase, 30KW-110KW.
Voltage: Three phase, 380V/460V, 50/60Hz.
Protection device class: IP68
Surrounding water temperature should be below 30º C.
The content of solid should not higher than 0.01%.
PH value of water: 6.5-8
Thrust load: 35, 500N
Flat cable with individual ground wire: 3× 6.0mm2 or 3× 25mm2 waterproof connecting cable
Cable length: 4-5m
| Motor Type |
Power |
Current |
Power Factor |
RPM |
| KW |
HP |
A |
cosΦ |
| MS200-30 |
30 |
40 |
64.5 |
0.84 |
2850 |
| MS200-37 |
37 |
50 |
79.7 |
0.84 |
2850 |
| MS200-45 |
45 |
60 |
94.6 |
0.85 |
2850 |
| MS200-55 |
55 |
75 |
115.7 |
0.85 |
2850 |
| MS200-63 |
63 |
85 |
130.2 |
0.86 |
2850 |
| MS200-75 |
75 |
100 |
155 |
0.86 |
2850 |
| MS200-90 |
90 |
120 |
185 |
0.86 |
2850 |
| MS200-110 |
110 |
150 |
226 |
0.86 |
2850 |
Audited Supplier 
){kind=link}
){kind=link}