Deep Well Multistage Submersible Water Pump Motor

• Customization: Available
• Power Source: AC Motor
• Starting Mode: Capacitor-start-and-run Single Phase Asynchronous Motor
• Model NO.: MS150
• Speed: High Speed
• Function: Driving
• Ms150: 6 Inch
• Transport Package: Exporting Packing
• Specification: stainless steel
• Trademark: EG
• Origin: Guangdong, China
• HS Code: 84136010
• Production Capacity: 500, 000 Units/Year

Product Description

Deep well multistage submersible water pump motor 


[CHARACTERS]
Meet the requirements of Standard IEC34-1 with the structure of water-cooled sealed lubrication, non-polluting.
The dimension of installation flange and spline meet the requirements of NEMA standard (USA National Electrical Manufacturing Association).
The outer shells of the motor and the shafts are made of stainless steel as well as the fixings. Other parts are rustproof.
The main bearing and the thrust bearing have the character of anti wearing and undertaking higher thrust load.
With anti-sand installation and reformed butyl-rubber pressure equilibrium membrane.

[PROPERTIES]
Power: Three phase, 5.5KW-37KW.
Voltage: Three phase, 380V/460V, 50/60Hz.
Protection device class: IP68
Surrounding water temperature should be below 30 Degrees.
The content of solid should not higher than 0.01%.
pH value of water: 6.5-8
Thrust load: 15, 500N
Flat cable with individual ground wire: 3× 6.0mm^2 or 3× 10.0mm^2 anti water connecting cable
Cable length: 1.5-4.0m

No.	Motor Type	KW	HP	Three Phase	cosΦ	rpm	L	Kg
				A			mm	Kg
1	MS150-5.5	5.5	7.5	13.2	0.82	2850	780	46
2	MS150-7.5	7.5	10	17.2	0.84	2850	800	50
3	MS150-9.2	9.2	12.5	20.8	0.85	2850	830	54
4	MS150-11	11	15	24.6	0.85	2850	855	57
5	MS150-13	13	17.5	28	0.86	2850	885	60
6	MS150-15	15	20	32.2	0.86	2850	968	67
7	MS150-18.5	18.5	25	39.2	0.86	2850	1018	73
8	MS150-22	22	30	46	0.87	2850	1068	79
9	MS150-26	26	35	53.5	0.88	2850	1113	84
10	MS150-30	30	40	61.6	0.88	2850	1168	90
11	MS150-37	37	50	79.7	0.88	2850	1200	105
12	MS150-45	45	60	94.6	0.88	2850	1235	130